Device description: The impedance moisture meter RWS DETECTOR is used for non-destructive measurement of moisture in a flat roof structure with electrically non-conductive materials. The impedance moisture meter can locate the location and moisture content. It helps to create a moisture map of the roof.
 It is an ideal complement to the CONTROFOIL DETECTOR spark device for spark testing of roofs without a CONTROFOIL detection layer.
 Technical specifications: - 4 measurement sensitivity ranges - two-level roof mode - two-level facade mode - signal penetration up to 10 cm deep - powered by a 9V battery (included) - lightweight and durable device - includes a telescopic handle - device weight: 1.8 kg - device dimensions: 125 x 275 x 75 mm
 Measurement: - instant detection of moisture values - non-destructive measurement - creation of a moisture map - horizontal and vertical use - roofs and facades - tracking moisture to the cause of leaks Cannot be used in structures with conductive layers, e.g. EPDM roofing, butyl rubber, asphalt strips with an aluminum support insert and on ETICS facades that are reinforced with wire mesh.
 Operation of the device: Operation of the device is simple and does not require special skills. By gradually applying the lower surface of the device to the roof or facade coating, moisture values are identified, which with increasing intensity are directed towards the source of leakage. The tested surface must be dry.